1200Mbps Dual Band IP67 Waterproof Dustproof Metal Case Outdoor
Wireless Base Station
Features:
IP67 Metal waterproof, dust proof and sunscreen shell, temperature
adaptive
OAP95 with metal waterproof, dust proof and sunscreen shell, avoid
the damage from dust, thunderstorm weather. Meantime, it adaptive
to various environment, the working temperature can be normal at
-40℃ to 55℃. Suit for any country.
High Power design, N connector for external antenna, more range and
stable signal
Designed in two line Power Amplifier on PCB board, the power can be
1000mW high power, 4PCS N connector,can connect with panel/omni
antenna based on request, can greatly increase the Wi-Fi range and
supply the stable Wi-Fi signal for users.
Power over Ethernet
OAP95 has integrated IEEE802.3at Power over Ethernet (PoE), for
easy installation and lower cost. So it can be installed in areas
where power outlets are not readily available, eliminating the mess
of altering existing network infrastructure.
Access Controller System & Cloud Management System
Work with WLAN controller in wireless AP operation mode, easily
access advanced network settings through PC, like AP status
monitor, change IP address, ESSID, Channel, Password, upgrade
firmware, backup and restore....
OAP95 is an Qualcomm Solution 11ac high power industrial use
Outdoor CPE with the next generation 802.11ac Wi-Fi standard,
combined 1200Mbps Wi-Fi speed over 2.4GHz(300Mbps) and
5GHz(900Mbps), equipped Gigabit WAN port, fast Ethernet data rate
make more than 100 end users can access into it to enjoy seamless
HD movies, streaming, online gaming, wireless security and other
bandwidth-intensive tasks.
Spec:
| Hardware: |
| Chipset | Atheros QCA9563 + QCA9882 +QCA8334 |
| Standard | 802.11ac/b/g/n, MIMO technology |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 10/100 /1000Mbps RJ45 WAN Port |
| 1 * Reset button, press 15 seconds to revert to default setting |
| Antenna | 4PCS SMA connector |
| Power consumption | 48V PoE<30W |
| Weight | 4KGS |
| RF Data |
Frequency | 2.4G: 802.11b/g/n; 5GHz: 802.11a/n/ac |
2.4GHz: 2.312GHz to 2.4835GHz 5GHz: 5.020 - 6.1000 GHz |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK |
| Throughput | 1200 Mbps |
| RF Power | 2.4G: 11n @MCS7:26±2DB, @MCS0:28±2DB. 11g @54M:27±2DB, @6M:29±2DB. 11b @11M:28±2DB, @1M:30±2DB. 5.8G: 11a @54M 23.5±2DB, @6M:26.5±2DB. 11n @HT20:MCS7 22.5±2DB, @MCS0:25.5±2DB. 11ac@HT80:MCS9 20.5±2DB, @MCS0:23.5±2DB. |
| Receive Sensitivity | 2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0. 11g: -72dbm@54Mbps, -88dbm@6Mbps. 11b: -85dbm@11Mbps, -94dbm@1Mbps. 5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps. 11n@HT20: -70dbm@MCS7, -90dbm@MCS0. 11ac@HT80:-60dbm@MCS9, -86dbm@MCS0. |
| EVM | 802.11n: ≤-28 DB 802.11g: ≤-25 DB 802.11b: ≤-10 DB 802.11a: ≤-25 DB |
| PPM | ±20ppm |
| Max Users | 128+ |
| Firmware Features: |
| Operation mode | Wireless AP, Gateway, WISP, Wi-Fi Repeater |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| SSID | Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain
Filter
IP and MAC Address Binding |
| Protocols | IPv4 |
| Others: |
| Package Contents | 1200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows
8, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -40~50 ℃, Storage Temperature: -40~70 ℃
Operating Humidity: 10%~90% non-condensing; Storage Humidity:
5%~90% non-condensing |
| Management | Firmware GUI , Remote Management, WLAN Controller, Cloud Management
System |
