11ac Dual Band 750Mbps 48V 802.3at Active PoE In Wall / Wall Sock
Wireless Access Point
Description:
PW740 is an 11ac wall mount style wireless access point upgrade to
the latest wireless-AC technology, fast data rate (433Mbps in 5G
and 300Mbps in 2.4GHz) and dual band allowing content to download
faster, large video or music files to sync more quickly and stream
seamlessly. Embed PoE, work in hotel, school, hospital mainly for a
stable wireless networking. Then work with Yunlink’s Access
Controller System and cloud management system, easy in central
configuration, meet with different advertisement and multi
authentication requirement , professional and cost effectively in
large area Wi-Fi solution
Wireless AC Technology, more users
The PW740 AC dual band wall mount Wireless Access Point offers AC
technology for seamless/smoother video and music streaming. More
users including computers, Internet-ready TVs, game consoles, and
other Wi-Fi devices can access into this wireless networking at
transfer rates up to733Mbps speed.
Dual Band, Less Interference
Double your network bandwidth with Dual-Band AC(2.4G and 5G)
designed to help avoid interference and maximize throughput. You
can browse web pages, handle mails and chat over 2.4G while
enjoying lag-free HD multimedia and online gaming over 5G without
worrying about interference.
Power over Ethernet
PW740 AC AP has integrated IEEE 802.3af standard Power over
Ethernet (PoE), for easy installation and lower cost. So it can be
installed in areas where power outlets are not readily available,
eliminating the mess of altering existing network infrastructure.
Access Controller System & Cloud Management System
With Access Control System, easily access advanced network settings
through PC, like AP status monitor, change IP address, ESSID,
Channel, Password, upgrade firmware, backup and restore....
Then work with Cloud Management System, easy to do central and
remote management, advertisement and multi authentication, even
billing functions in the near future to make this AP more
professional in Wi-Fi Projects.
Main Features:
Compatible with 802.11ac wireless technology, work with
802.11ac/b/g/n device
1 * 10/100Mbps WAN port, 1 * 10/100Mbps LAN port, WAN port support
IEEE 802.3af PoE.
Simultaneous Dual-Band with speeds up to 733Mbps at 2.4GHz and 5GHz
band concurrently
16M Flash + 128M DDRII RAM, more stable performance in wireless
Easy setup, remote and central managed by access controller system
and Cloud management system
Spec:
| HARDWARE FEATURES |
| Interface | 1 * 10/100Mbps WAN Port 1 * 10/100Mbps LAN Port 1 * LED on/off switch |
| Button | Reset Button, press 15 seconds to revert to default data. |
| Chipset | Qualcomm QCA9531+QCA9887 |
| Flash | 16M Flash |
| SDRAM | 128M DDR |
| External Power Supply | 48V PoE, IEEE 802.3af standard |
| Dimensions (W X D X H) | 86*86*35mm |
| Antenna Type | 1*5.8GHz 2dBi internal antenna 2 * 2.4GHz 2dBi internal antennas |
| WIRELESS FEATURES |
| Wireless Standards | IEEE 802.11ac/n/a 5GHz; IEEE 802.11n/g/b 2.4GHz |
| Frequency | 5GHz and 2.4GHz |
| Signal Rate | 5GHz:Up to 433Mbps; 2.4GHz: Up to 300Mbps |
| EIRP | <20dBm(EIRP) |
| Reception Sensitivity | 2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0. 11g: -72dbm@54Mbps, -88dbm@6Mbps. 11b: -85dbm@11Mbps, -94dbm@1Mbps. 5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps. 11n: -70dbm@MCS7, -90dbm@MCS0. 11ac:-60dbm@MCS9, -86dbm@MCS0. |
| RF Power | 2.4G: 11n @MCS7:15±2DB, @MCS0:17±2DB. 11g @54M:16±2DB, @6M:18±2DB. 11b @11M:18±2DB, @1M:20±2DB. 5.8G: 11a @54M:15±2DB, @6M:17±2DB. 11n @MCS7:14±2DB, @MCS0:16±2DB. 11ac @MCS9:13±2DB, @MCS0:15±2DB. |
| Wireless | Auto-Channel selection |
| Distance Control (802.1x Ack timeout) |
| Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) |
| BSSID |
| EVM | 802.11n: ≤-28 DB 802.11g: ≤-25 DB 802.11b: ≤-10 DB 802.11a: ≤-25 DB |
| PPM | ±20ppm |
| Max Access Users | 128 |
| Operation Mode | Wireless AP, Gateway, Wi-Fi Repeater |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| LED Status | Sys(System), WAN, Wi-Fi |
| Management |
| System Settings | Web-based configuration (HTTP/Telnet), Access Control System (SNMP) |
| Firmware Upgrade | Upgrade firmware via web browser or TFTP |
| Administration | Admin Password can be configured |
| System monitoring | Watch dog, Status in hand , useful statistic and Event log |
| Logs | Supports local logs, logs host, logs file export |
| Reset | Reset or factory defaults |
| Backup | Restore settings & configuration of the device to local file,
Scheduled reboot |
| OTHERS |
| Certification | |
| Package Contents | 733Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows
8, Windows 10, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -20~55 ℃ Storage Temperature: -40~70 ℃
Humidity: 5%~95% non-condensing |
Working Diagram:
