ABS + Metal case, waterproof, dust proof and sunscreen shell,
temperature adaptive and board protective
CPE3200 with ABS waterproof, dust proof and sunscreen shell, avoid
the damage from dust, thunderstorm weather. Meantime, it adaptive
to various environment, the working temperature can be normal at
-40℃ to 55℃. Suit for any country.
High Power for more range and stable signal
Designed in two line Power Amplifier on PCB board, the power can be
1000mW high power, 18dBi MIMO high gain antenna,the wifi range is
can be 10KM distance, greatly increase the wifi range and supply
the stable wifi signal for users.
Power over Ethernet
CPE3200 has integrated IEEE802.3at Power over Ethernet (PoE), for
easy installation and lower cost. So it can be installed in areas
where power outlets are not readily available, eliminating the mess
of altering existing network infrastructure.
Access Controller System & Cloud Management System
Work with WLAN controller in wireless AP operation mode, easily
access advanced network settings through PC, like AP status
monitor, change IP address, ESSID, Channel, Password, upgrade
firmware, backup and restore....
Main Features:
Comply with IEEE 802.11ac/b/g/n, dual band, 1200Mbps Data Rate
1 10/100/1000Mbps WAN Port,faster Ethernet.
1000mW high power, build in 18dBi MIMO antenna, stronger signal
strength, more wireless coverage, 16M Flash, 128M DDR2 RAM, more
user, more stable
Support IEEE 802.3at PoE standard
Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4
SSID in 5GHz)
Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP,
Repeater, WISP operation mode
With function of build in firewall, IP filter, URL filter and MAC
filter
Comply with IEEE 802.3az standard, beamforming technology, RF power
adjustment and frequency analyzer for better application in
different environment
Support DDNS, VPN pass through, Port forwarding and DMZ host
Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security
Spec:
| Hardware: |
| Chipset | Qulcomm QCA9563 + QCA9882 +QCA8334 |
| Standard | 802.11ac/b/g/n, MIMO technology |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 10/100 /1000Mbps RJ45 WAN Port |
| Antenna | Build in 18dBi Panel Antenna |
| Power consumption | 48V PoE<30W |
| Size | L: 420mm, W: 250mm, H: 90 mm |
| Weight | 3KGS |
| RF Data |
Frequency | 2.4G:802.11b/g/n: 5GHz:802.11a/n/ac |
| 2.4GHz,5GHz |
| Country code | FCC,IC,ETSI,MKK,MKK1,MKK2,MKK3,NCC,RUSSIAN,CN |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK |
| Throughput | 1200Mbps |
| RF Power | 2.4G: 11n @MCS7:26±2DB, @MCS0:28±2DB. 11g @54M:27±2DB, @6M:29±2DB. 11b @11M:28±2DB, @1M:30±2DB. 5.8G: 11a @54M 23±2DB, @6M 26±2DB. 11n @HT20:MCS7 22±2DB, @MCS0 25±2DB. 11ac@HT80:MCS9 20±2DB, @MCS0 23±2DB. |
| Receive Sensitivity | 2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0. 11g: -72dbm@54Mbps, -88dbm@6Mbps. 11b: -85dbm@11Mbps, -94dbm@1Mbps. 5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps. 11n@HT20: -70dbm@MCS7, -90dbm@MCS0. 11ac@HT80:-60dbm@MCS9, -86dbm@MCS0. |
| EVM | 802.11n: ≤-28 DB 802.11g: ≤-25 DB 802.11b: ≤-10 DB 802.11a: ≤-25 DB |
| PPM | ±20ppm |
| Firmware Features: |
| Operation mode | Wireless AP, Gateway, WISP, WiFi Repeater |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| SSID | Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain
Filter
IP and MAC Address Binding |
| Protocols | IPv4 |
| Others: |
| Package Contents | 1200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows
8, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -40~55 ℃ Storage Temperature: -40~70 ℃
Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing |
| Management | Firmware GUI , Remote Management, WLAN Controller, Cloud Management
System |
