Comply with IEEE 802.11ac b g n Dual Band 1200Mbps Data Rate
Outdoor Wireless AP
Features:
ABS weather-proof case
AP1200 with ABS waterproof, dust proof and sunscreen shell, avoid
the damage from dust, rainy weather. Meantime, it adaptive to
various environment, the working temperature can be at -40℃ to 55℃.
Suit for any country.
High Power, 5dBi omni antenna, more WiFi Range
Designed in two line Power Amplifier on PCB board, the power can be
500mW high power, build in 5dBi omni WiFi antenna, outdoor WiFi
range up to 500 meters.
Power over Ethernet
AP1200 has integrated active Power over Ethernet (PoE), for easy
installation and lower cost. So it can be installed in areas where
power outlets are not readily available, eliminating the mess of
altering existing network infrastructure. Pls note, the default is
48V IEEE 802.3at PoE, 24V Passive PoE is possible by change PCB
board.
Access Controller System & Cloud Management System
Work with WLAN controller in wireless AP operation mode, easily
access advanced network settings through PC, like AP status
monitor, change IP address, ESSID, Channel, Password, upgrade
firmware, backup and restore....
Then work with Cloud Management System, easy to do central and
remote management, advertisement and multi authentication make this
device more professional in WiFi Projects.
AP1200 is the 1200Mbps high power industrial use Outdoor wireless
access point with the next generation 802.11ac Wi-Fi standard, 2x2
MIMO technology, it is dual band, 2.4GHz(300Mbps) and
5GHz(900Mbps), Gigabit WAN/LAN port, the fast Ethernet data rate
and clear frequency make 100+ end users can access into it to enjoy
seamless HD movies, streaming, online gaming, wireless security and
other bandwidth-intensive tasks.
Spec:
| Hardware: |
| Chipset | Qualcomm QCA9563 + QCA9882 +QCA8334 |
| Standard | 802.11ac/b/g/n, MIMO technology |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 10/100/1000Mbps RJ45 WAN Port, WAN port support IEEE 802.3at
standard PoE |
| 1 * 10/100/1000Mbps RJ45 LAN Port |
| 1 * Reset button, press 15 seconds to revert to default setting |
| Antenna | Build in omni antenna, 5dBi, MIMO |
| Power consumption | 48V PoE<30W |
| Size | 315mm * 145 mm * 80 mm |
| RF Data |
Frequency | 2.4G: 802.11b/g/n; 5GHz: 802.11a/n/ac |
2.4GHz: 2.312GHz to 2.4835GHz 5GHz: 5.020 - 6.1000 GHz |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK |
| Data Rate | 1200Mbps (2.4G 300Mbps, 5.8G 900Mbps) |
| Receive Sensitivity & RF Power |
| RF Power | 2.4G: 11n @MCS7:23±2DB, @MCS0:25±2DB. 11g @54M:24±2DB, @6M:26±2DB. 11b @11M:26±2DB, @1M:28±2DB. 5.8G: 11a @54M:24±2DB, @6M:26±2DB. 11n @MCS7:22±2DB, @MCS0:24±2DB. 11ac @MCS9:21±2DB, @MCS0:23±2DB. |
| Receive Sensitivity | 2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0. 11g: -72dbm@54Mbps, -88dbm@6Mbps. 11b: -85dbm@11Mbps, -94dbm@1Mbps. 5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps. 11n: -70dbm@MCS7, -90dbm@MCS0. 11ac:-60dbm@MCS9, -86dbm@MCS0. |
| EVM | 11n: ≤-28 DB 11g: ≤-25 DB 11b: ≤-10 DB 11a: ≤-25 DB |
| PPM | ±20ppm |
| Max Users | 128 |
| Firmware Features: |
| Operation mode | Wireless AP, Gateway, WISP, WiFi Repeater |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK, 802.1x encryption |
| SSID | Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain
Filter
IP and MAC Address Binding |
| Protocols | IPv4 |
| Others: |
| Package Contents | 1200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows
8, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -40~55 ℃, Storage Temperature: -40~70 ℃
Operating Humidity: 10%~90% non-condensing; Storage Humidity:
5%~90% non-condensing |
| Management | Firmware GUI , Remote Management, WLAN Controller, Cloud Management
System |
