1200Mbps Dual Band 48V 802.3at PoE Ceiling Mounted Wireless Access
Point for Home Hotel
Description:
XD-8508HR is an high power industrial Ceiling Wireless Access Point
with the next generation 802.11ac Wi-Fi standard, combined 1200Mbps
Wi-Fi speed over 2.4GHz(300Mbps) and 5GHz(900Mbps), equiped Gigabit
WAN port, fast ethernet data rate make more than 100 end users can
acccess into XD-8508HR to enjoy seamless HD movies, streaming,
online gaming, wireless security and other bandwidth-intensive
tasks, widely be used in school, hospital, hotel, office, shipping
mall...
High Power for more range and stable signal
Designed in two line Power Amplifier on PCB board, the power can be
1000mW high power, 5dBi MIMO high gain antenna, together with
Ceiling mount, greatly increase the wifi range and supply the
stable wifi signal for users.
Power over Ethernet
XD-8508HR has integrated IEEE802.3at Power over Ethernet (PoE), for
easy installation and lower cost. So it can be installed in areas
where power outlets are not readily available, eliminating the mess
of altering existing network infrastructure.
Access Controller System & Cloud Management System
With Access Control System, easily access advanced network settings
through PC, like monitor the AP’s working status, change IP
address, SSID, Channel, Password, upgrade firmware, backup and
restore....
Then work with Cloud Management System, easy to do central and
remote management, advertisement and captive portal authentication
to make this AP more professional in WiFi Projects.
Spec:
| Hardware: |
| Chipset | RTL8197DN+RTL8812AR+RTL8192ER+RTL8211E |
| Standard | 802.11ac/b/g/n, MIMO technology |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 10/100 /1000Mbps RJ45 WAN Port |
| 1 * 10/100 Mbps RJ45 LAN Port |
| 1 * Reset button, press 15 seconds to revert to default setting |
| Antenna | Build in 5dBi MIMO Antenna |
| Power consumption | 48V PoE<30W |
| Size | 18.8*4.5CM |
| Weight | |
| RF Data |
Frequency | 2.4G: 802.11b/g/n 5GHz: 802.11a/n/ac |
| 2.4GHz,5GHz |
| Country code | FCC,IC,ETSI,MKK,MKK1,MKK2,MKK3,NCC,RUSSIAN,CN |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK |
| Throughput | 1200 Mbps |
| Firmware Features: |
| Operation mode | Wireless AP, Gateway, WISP, WiFi Repeater |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| SSID | Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain
Filter
IP and MAC Address Binding |
| Protocols | IPv4 |
| Others: |
| Package Contents | 1200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows
8, Windows 10, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: 0~40 ℃(32 ℉~104℉) Storage Temperature:
-40~70 ℃ (-40 ℉~158℉)
Operating Humidity: 10%~90% non-condensing; Storage Humidity:
5%~90% non-condensing |
| Management | Firmware GUI , Remote Management, WLAN Controller, Cloud Management
System |
Working Diagram:
Installation:
