What It Does
XD9500Q & XD9508Q is a 300Mbps high power Ceiling Wireless Access
Point with Qualcomm QCA9531 Chipset. Comply with IEEE 802.11b/g/n
standard, 300Mbps data rate, with MIMO omni antenna inside, 500mW
high RF power together with PoE, easy to set up in different
environment.
Ceiling Mount case, Hardware with Qualcomm chipset, 16M Flash, 64M
DDR2, firmware work with AC controller for central management and
captive portal authentication function, it designed specifically
for business-class environments such as hotels, airports, coffee
shops, shopping centers, sporting venues, and university campus.
Stylish Ceiling Mount Design
Housed in a stylish ceiling mountable case, the XD9500Q & XD9508Q
can be installed on a wall or ceiling to blends in nicely with most
interior decorations in a modern hotel. With big space and
Installed highly on ceiling, it extends optimum wireless signal to
multiple neighboring rooms and better heat radiation.
High Power and Whole Coverage
With 500mW high power, Internally equipped with 2X2 multiple-input,
multiple-output (MIMO) 5dBi omni antennas improve range and
maximize data rates. Field tested to wirelessly cover 6~8 hotel
rooms at an indoor operating distance of 50 meters and allow
simultaneous accesses by up to 50 users. Up to 300Mbps wireless
rate ensures multiple users an adequate level of service.
Power over Ethernet
The device has integrated Power over Ethernet (PoE) for easy
installation and lower cost, it can be installed in areas where
power outlets are not readily available, eliminating the mess of
altering existing network infrastructure. But pls note, XD9500Q
support 24V Passive PoE, XD9508Q support IEEE 802.3af PoE,48V
WLAN Controller & Cloud Server support
This XD9500Q & XD9508Q work with Access Control System, easily
access advanced network settings through PC, like AP status
monitor, change IP address, ESSID, Channel, Password, upgrade
firmware, backup and restore...
What’s more, this wireless access point work with Cloud Server,
easy to do remote management, Advertisement, captive portal
authentication, even Billing and Radius supported in the near
future, which make his AP more professional in WiFi Projects.
Spec:
Specification |
| Hardware |
| MCU | Qualcomm QCA9531 |
| RF | 2T2R, 300Mbps MIMO tech , comply with IEEE 802.11b/g/n standard |
| Memory | 64MB DDR RAM |
| Flash | 16MB |
| Interface | 2 x RJ-45 for 10/100 Mbps WAN/LAN Port (WAN port support IEEE
802.3af POE) |
| 1 x Reset button(Reset & Factory Defaults) |
| 1 x Power DC Jack |
Power
| DC: 12V/1A; 110V/220V XD9500Q: 24V Passive PoE XD9508Q: IEEE 802.3af 48V PoE |
| Antenna | Build in 2PCS Omni 5dbi antenna |
| Size | 168*35mm |
| RF |
| Frequency | 802.11b/g/n, 533MHz |
| 2.4~2.4835GHz |
| U.S.,Europe and Japan product covering 2.400 to 2.4835
GHz,programmable for different country regulations |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK |
| Throughput | 300 Mbps |
| Sensitivity | 802.11n(2.4GHz) | 802.11g | 802.11b |
| -90dBm @ MCS0 | - 90dBm @ 6Mbps | - 95dBm @ 1Mbps |
| -70dBm @ MCS7 | - 72dBm @ 54Mbps | - 90dBm @ 11Mbps |
| -90dBm @ MCS8 | | |
| -68dBm @ MCS15 | | |
| Output Power | | Radio1(WLAN1) | |
| 802.11n(2.4GHz)(± 1.5dBm) | 802.11g(± 1.5dBm) | 802.11b(±1.5dBm) |
| 25dBm@ MCS0~2/MCS8~10 | 25dBm @ 6~24Mbps | 26dBm @1~11Mbps |
| 25dBm @ MCS3/MCS11 | 24dBm @ 36Mbps | |
| 24dBm @ MCS4/MCS12 | 24dBm @ 48Mbps | |
| 24dBm @ MCS5/MCS13 | 24dBm @ 54Mbps | |
| 24dBm @ MCS6/MCS14 | | |
| 23dBm @ MCS7/MCS15 | | |
