2KM Long Distance Ajustable RF Power WDS One Button Connection 5.8G
Outdoor WiFi Bridge
Features:
ABS waterproof, dust proof and sunscreen shell, temperature
adaptive and board protective
CPE180 with ABS waterproof, dust proof and sunscreen shell, avoid
the damage from dust, thunderstorm weather. Meantime, it adaptive
to various environment, the working temperature can be normal at
-40℃ to 55℃. Suit for any country.
300Mbps high speed, Atheros industrial chipset, wider application
CPE180 comply with IEEE 802.11a/n standard, 300Mbps high speed,
with Atheros industrial solution, it is a wifi bridge with low
power consumption, strong security. With PTP, PTMP, bridge
operation mode, widely be used in voice, video, data transmission
in long range wireless monitor industrial.
300mW High Power, 14dBi High Gain Antenna, Long Range wifi Device
in market.
CPE180 with external power amplifier, 300mW true power, 14dBi high
gain antenna, the wifi range is more than 2000 meters, it is the
device with very stable performance in long range, but competitive
in price.
Spec:
| Standard | IEEE802.3, IEEE 802.11n, IEEE 802.11a |
| Chipset | Atheros AR9344 |
| Frequency | 5020~6100MHz, |
| Channel | CH4~CH220 |
| Modulation | OFDM = BPSK,QPSK,16-QAM,64-QAM;DSSS = DBPSK,DQPSK,CCK |
| Data Rate | 11n: up to 300Mbps(dynamic) 11a: up to 54Mbps(dynamic) |
| Protocol | CSMA/CA,CSMA/CD,TCP/IP,ICMP,NAT,PPPoE, DHCP , Wired static , Wifi
Client , UDP, DDNS, |
| Operation Mode | AP, Gateway, Bridge, WISP, WDS |
| Security | 64/128bit WEP WPA(AES,TKIP with IEEE 802.1x) WPA2(AES,TKIPwith IEEE 802.1x) WPS |
| RF Output Power | 802.11n:MCS7 19±2 DB, MCS0 22±2DB. 802.11a:54M 20±2DB,6M 23±2DB. |
| Receive Sensitivity | 802.11n: -68dbm@MCS7; -88dbm@MCS7; 802.11a: -72dbm@54Mbps; -92dbm@6Mbps; |
| Antenna | 14dBi MIMO Panel antenna |
| Size(mm) | 115mm * 69 mm * 1.6 mm |
| Working Temperature | -40°C ~ 55°C |
| Storage Temperature | -40°C ~ 70°C |
| Humidity | 10% ~ 90% (Non-condensing) |
| Interface | 1 * RJ-45 WAN Port 1 * RJ-45 LAN Port 1 * Reset Button 1 * DC Jack 1 * WDS Switch Button, press to do WDS connection |
| Power | Output: DC12V(POE 24V/0.5A), 1A; Input: 110V/220V |
| LED Light | Power, WiFi, WAN, LAN,Signal Strength |
Working Diagram:
