2200Mbps 802.11 AC Access Point MU-MIMO WAVE2 Ceiling Mounted
Adjustable RF Power
XD6800 is an 11ac Wi-Fi standard Qualcomm Chipset high power
industrial Ceiling Wireless Access Point support MU-MIMO, Wave2.0.
Combined 2200Mbps Wi-Fi speed over 3 radios:
2.4GHz(400Mbps)+5GHz(900Mbps)+5GHz(900Mbps), equipped Gigabit WAN &
LAN port, fast Ethernet data rate make more than 200 end users can
access into XD6800 with faster Ethernet, make them to enjoy
seamless HD movies, streaming, online gaming, wireless security and
other bandwidth-intensive tasks, widely be used in school,
hospital, hotel, office, shipping mall...
High Power for more range and stable signal
Designed in Power Amplifier on PCB board, the power can be 300mW
high power, 3dBi MIMO high gain antenna, together with Ceiling
mount, greatly increase the wireless range and supply the stable
Wi-Fi signal for users.
Metal Case, perfect heat dissipation to extend the working life
The bottom shell with metal shell, improved the heat dissipation
function, make it work as normal in -30°C to 70°C, extend the
device working life.
Wave 2 Technology
With Wave 2 Technology, it adopt 256QAM modulation, support MU-MIMO
(Multi-User Multiple-Input Multiple-Output), 8 Spatial Steams,
greatly to improved the communication efficiency.
Power over Ethernet and DC Power available
XD6800 has integrated IEEE802.3at Power over Ethernet (PoE), for
easy installation and lower cost. What’s more, it support DC input
if need, So it can be installed in areas where power outlets are
not readily available, eliminating the mess of altering existing
network infrastructure.
SPECIFICATION:
| Hardware: |
| Chipset | Qualcomm IPQ4019+QCA9886+QCA8075 |
| Standard | 802.11ac/b/g/n, MIMO technology |
| Memory | 512MB DDR3 RAM |
| Flash | 32MB |
| Interface | 1 * 10/100 /1000Mbps RJ45 WAN Port |
| 1 * 10/100 / 1000Mbps RJ45 LAN Port |
| 1 * Reset button, press 10 seconds to revert to default setting |
| Antenna | Build in 3dBi MIMO Antenna |
| Power consumption | 48V PoE<30W |
| Size | 198mm X 32mm |
| RF Data |
Frequency | 2.4G:802.11b/g/n: 2.4GHz – 2.484GHz |
| 5GHz:802.11a/n/ac MIMO: 5.150GHz～5.850GHz |
| Country code | FCC,IC,ETSI,MKK,MKK1,MKK2,MKK3,NCC,RUSSIAN,CN |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM |
| DSSS = DBPSK, DQPSK, CCK |
| Throughput | 2200Mbps |
| 2.4G RF Power (IPQ4019) | 802.11b | 11M | 23±2dBm | 1M | 25±2dBm |
| 802.11g | 54M | 22±2dBm | 6M | 24±2dBm |
| 802.11n HT20 | MCS7 | 21±2dBm | MCS0 | 23±2dBm |
| 802.11n HT40 | MCS7 | 21±2dBm | MCS0 | 23±2dBm |
5G RF Power (IPQ4019) | 802.11a | 54M | 19±2dBm | 6M | 21±2dBm |
| 802.11n HT20 | MCS7 | 18±2dBm | MCS0 | 20±2dBm |
| 802.11n HT40 | MCS7 | 18±2dBm | MCS0 | 20±2dBm |
| 802.11ac HT80 | MCS9 | 17±2dBm | MCS0 | 19±2dBm |
5G RF Power (QCA9886) | 802.11a | 54M | 19±2dBm | 6M | 21±2dBm |
| 802.11n HT20 | MCS7 | 18±2dBm | MCS0 | 20±2dBm |
| 802.11n HT40 | MCS7 | 18±2dBm | MCS0 | 20±2dBm |
| 802.11ac HT80 | MCS9 | 17±2dBm | MCS0 | 19±2dBm |
| 2.4G Receive Sensitivity | 802.11b | 11M | -85dBm | 1M | -94dBm |
| 802.11g | 54M | -72dBm | 6M | -90dBm |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm |
| 5G Receive Sensitivity | 802.11a | 54M | -72dBm | 6M | -90dBm |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm |
| 802.11ac HT80 | MCS9 | -58dBm | MCS0 | -85dBm |
| EVM | 2.4G EVM: 802.11b: ≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28dB 5G EVM: 802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB |
| PPM | ±20ppm |
| Max Users | 256+ |
| Firmware Features: |
| Operation mode | Wireless AP, Gateway, WISP, WiFi Repeater |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| SSID | Multiple SSID (4 SSID for 2.4G, 8 SSID for 5.8G) |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain
Filter
IP and MAC Address Binding |
| Protocols | IPv4 |
| Others: |
| Package Contents | 2200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows
8, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -20~55 ℃ Limit working temperature: -30~70 ℃ Storage Temperature: -40~70 ℃ Humidity: 5%~95% non-condensing |
| Management | Firmware GUI , Remote Management, WLAN Controller, Cloud Management
System |
